Home Page Crystals and Minerals Gem Cutting/Faceting Cabbing Rough Facet RoughFaceting Supplies Checkout

WORLDWIDE GEMS LTD.

1. Rough Amethyst2. Preform
3. Partially Cut4. Finished Amethyst


Preforming Laps Polishing Laps Master Laps Miscellaneous Facet/Cab Rough Ultra-Tec

Faceting Supplies:

Below you will see a selection of some of the supplies and equipment used in Faceting. If you do not see what you are looking for or require more information about anything please contact us at info@worldwidegems.co.nz 

If you require more information about any products we have listed please see below a list of the websites we are distributors for.  We can also order anything you require from these suppliers  although shipments of orders are subject to practicalities of having sufficient  size/quantity   to satisfy supplier minimum orders. 

For Batt Laps information and technical  details from Gearloose Lapidary:  www.gearloose.com  

For Crystalite products and information : www.abrasive-tech.com/crystalite.aspx   

For Raytech products and information:  www.raytech-ind.com


Preforming Laps:

For fast removal/grinding away of surplus material use either 80 grit (fastest), 180, 260 or 360 laps. These course laps will have to be followed by finer grit sized laps sizes of 600 or 1200 (slowest) to prepare surface for fine smoothing and pre-polishing or polishing. In many cases you will be able to go directly from a 1200 lap to pre-polish or even polishing. Either use a solid lap or a ‘topper lap” with a master lap as a support for preforming or rough shaping. Obviously the lap grit size should be chosen relative to the amount of material that needs to be removed. Remember that a coarse grit will leave deeper grinding marks that must be totally smoothed/ removed before polishing is attempted.

Crystalite: The Standard brand diamond discs (laps) are used by professional cutters worldwide and are excellent for faceting. They are designed to exceed the most rigid requirements. The aluminium backs are ground flat and parallel to exacting standards. Additionally, all the Standard brand discs are made with 100% diamond and bonded with a hard electroplated nickel. They are also available with a ¼ inch-20 thread screw back mount, allowing you to utilize the full face of the disc. Other diameters, mesh sizes and arbour hole sizes are available. Crystalite is one of the brands marketed by the worlds leading manufacturer of grinding and polishing products, Abrasive Technology.

Economy Brand: These are products that are manufactured in Asia to a decent standard but not as high as the “branded” international multinational corporations. They are designed to be a less costly alternative to the top brands. The old adage applies..you get what you pay for.. and generally the economy brands will not have the same degree of precision or longevity. However, they are well priced and good value for the money but you should not expect the same level of life from these products.

Nu-Bond by Raytech:  NuBond is a very effective  pre-polish facet lap. A NuBond lap requires little if any break-in to produce smooth finishes. Compared to an electrobond lap, it will scratch less and will cut more consistently over a longer service life.  Multilayer NuBond laps have a higher concentration of friable, self-sharpening diamond bonded directly to a solid aluminum backer. NuBond laps are precise and true running, lightweight and corrosion resistant.   Important: To replace an electrobond lap, select a NuBond which is one grit coarser than the electrobond. Even though coarser, NuBond will scratch and chip less.  So a 325 grit NuBond replaces a 600 Electrobond, a 600 NuBond replaces a 1200 Electrobond and a 1200 NuBond replaces a 3000 Electrobond.

80 GRIT ECONOMY PREFORMING/GRINDING LAP80 GRIT ECONOMY PREFORMING TOPPER LAP 1 MM
Economy preforming/grinding lap. 7¾ inches in diameter (20 CM), 9mm in thickness with a 12.7mm arbour hole ( ½ inch). Solid steel diamond plated with 80 grit for quick stock removal. Must be dried after use or will rust. Economy preforming topper lap. 7¾ inches in diameter (20 CM), 1mm in thickness with a 12.7mm arbour hole ( ½ inch). Solid steel diamond plated with 80 grit for quick stock removal. Must be dried after use or will rust.

FSPE80

$NZ 56.00

FSPET80

$NZ 32.00

Add to cart

Add to cart

  
180 GRIT ECONOMY PREFORMING/GRINDING LAP260 GRIT ECONOMY PREFORMING/GRINDING LAP
Economy preforming/grinding lap. 7¾ inches in diameter (20 CM), 9mm in thickness with a 12.7mm arbour hole ( ½ inch). Solid steel diamond plated with 180 grit for quick stock removal. Must be dried after use or will rust. Economy preforming/grinding lap. 7¾ inches in diameter (20 CM), 9mm in thickness with a 12.7mm arbour hole ( ½ inch). Solid steel diamond plated with 260 grit for quick stock removal. Must be dried after use or will rust.

FSPE180

$NZ 54.00

FSPE260

$NZ 54.00

Add to cart

Add to cart

  
 
SHOPPING CART SELECTIONYou can change Quantity Ordered in Shopping Cart

Total $NZ 0.00 (excl. GST)


260 GRIT ECONOMY PREFORMING TOPPER LAP 1 MM260 GRIT TOP QUALITY  PREFORMING/GRINDING LAP360 GRIT ECONOMY PREFORMING/GRINDING LAP600 GRIT ECONOMY PREFORMING LAP
Economy preforming topper lap. 7¾ inches in diameter (20 CM), 1mm in thickness with a 12.7mm arbour hole ( ½ inch). Solid steel diamond plated with 260 grit for quick stock removal. Must be dried after use or will rust. Superior grade 260 grit preforming/grinding lap manufactured by Crystalite, a US supplier. 8 inches (203mm) in diameter and 11 mm thick with ½ inch arbour. Aluminium base with diamond plated cutting surface. Economy preforming/grinding lap. 7¾ inches in diameter (20 CM), 9mm in thickness with a 12.7mm arbour hole ( ½ inch). Solid steel diamond plated with 360 grit for quick stock removal. Must be dried after use or will rust. Economy preforming lap. 7¾ inches in diameter (20 CM), 9mm in thickness with a 12.7mm arbour hole (½ inch). Solid steel diamond plated with 600 grit for slow stock removal. Must be dried after use or will rust.

FSPET260

$NZ 28.00

FSPS260

$NZ 186.00

FSPE360

$NZ 53.00

FSPE600

$NZ 53.00

Add to cart

Add to cart

Add to cart

Add to cart

    
600 GRIT ECONOMY PREFORMING TOPPER LAP 1 MM600 GRIT TOP QUALITY PREFORMING LAP1200 GRIT ECONOMY PREFORMING LAPNUBOND SUPERIOR GRADE 325 GRIT PREPOLISH  LAP 6 INCH
Economy preforming topper lap. 7¾ inches in diameter (20 CM), 1mm in thickness with a 12.7mm arbour hole ( ½ inch). Solid steel diamond plated with 600 grit for slow stock removal. Must be dried after use or will rust. Superior grade 600 grit preforming lap manufactured by Crystalite, a US supplier. 8 inches (203mm) in diameter and 11 mm thick with ½ inch arbour. Aluminium base with diamond plated cutting surface. Economy preforming lap. 7¾ inches in diameter (20 CM), 9mm thick with a 12.7mm arbour hole ( ½ inch). Solid steel diamond plated with 1200 grit for very slow stock removal. Must be dried after use or will rust. NuBond 6 inch (15 CM) lap 6mm thick 325 grit are superior grade grinding laps manufactured by Raytech . Multilayered they have a higher concentration of friable, self sharpening diamonds bonded directly to an Aluminium base.

FSPET600

$NZ 28.00

FSPS600

$NZ 200.00

FSPE1200

$NZ 62.00

FSPN6325

$NZ 291.00

Add to cart

Add to cart

Add to cart

Add to cart

    
NUBOND SUPERIOR GRADE 600 GRIT PREPOLISH  LAP 6 INCH NUBOND SUPERIOR GRADE 1200 GRIT PREPOLISH LAP 6 INCH NUBOND SUPERIOR GRADE 600 GRIT PREPOLISH LAP 8 INCH NUBOND SUPERIOR GRADE 1200 GRIT PREPOLISH LAP 8 INCH
NuBond 6 inch (15 CM) lap 6mm thick 600 grit are superior grade fine grinding laps manufactured by Raytech . Multilayered they have a higher concentration of friable, self sharpening diamonds bonded directly to an Aluminium base. NuBond 6 inch (15CM) lap 6mm thick 1200 grit are superior grade pre-polishing laps manufactured by Raytech . Multilayered they have a higher concentration of friable, self sharpening diamonds bonded directly to an Aluminium base. NuBond 8 inch (20 CM) lap 6 mm thick 600 grit are superior grade fine grinding laps manufactured by Raytech . Multilayered they have a higher concentration of friable, self sharpening diamonds bonded directly to an Aluminium base. NuBond 8 inch (20CM) lap 6mm thick 1200 grit are superior grade pre-polishing laps manufactured by Raytech . Multilayered they have a higher concentration of friable, self sharpening diamonds bonded directly to an Aluminium base.

FSPN6600

$NZ 291.00

FSPN61200

$NZ 291.00

FSPN8600

$NZ 363.00

FSPN81200

$NZ 363.00

Add to cart

Add to cart

Add to cart

Add to cart

    
 

Polishing Laps and Supplies:

There are many different options available when polishing gems. We are listing some we use below but can source other options for you if required. Tin laps are charged with either a diamond slurry or a selected oxide compound such as cerium oxide, chrome oxide etc. With Tin laps it is obviously better to choose one option and stick to it so as to avoid cross-contamination of differing polishes. We carry and represent the following Tin Lap manufacturers.

  • Crystalite Tin Laps manufactured by Abrasive Technology in the U.S.A.
  • Batt Laps Tin and cast alloy Laps manufactured by  Gearloose Lapidary In the U.S.A.
  • Raytech Tin Laps manufactured by Lyman Products Corporation in the U.S.A.

If you want a little more flexibility Ultralaps are thin, flexible plastic polymers pre-charged with applicable polishing compounds. These are placed on top of a master lap and run with a water drip. The most common types of Ultralaps and usages are shown below:

  • Spectra Ultralaps (high purity Cerium Oxide)- Good for final polish on Quartz family gems and Beryl’s
  • Cerium Oxide-will polish Quartz, Opal, Tourmaline, beryl and some soft stones like Sunstone
  • Alumina Oxide-will polish Beryl, Tourmaline, Garnet, Topaz, Peridot, Danburite etc.
  • Tin Oxide-most cabbing materials, glass and materials containing Quartz, Tourmaline, garnet and Sphene.

Some other polishing options which we stock are:

  • Darkside laps:  These are made by Jon Rolfe of Gearloose Lapidary and are rapidly gaining popularity among faceters.  This lap was created to combat rising metal prices and to create an affordable easy to charge and use lap. These are great performers and are especially effective for Quartzes when used with Cerium Oxide. 
  • Battwing Lap:  This is a one step prepolish/polish lap made by Gearloose Lapidary.  A combination of a Batt Lap around the outer portion of lap and a Darkside on the innner.  This saves having to change Laps when going from Prepolish to polishing.  Stone must be wiped clean in between to prevent contamination.  Film of coolant, carrier and swarf is carried always outward by centrifugal force so obviously final polishing must always be on the inner Darkside.

 

BATT LAP 8 INCH SUPERIOR GRADE TIN ALLOY LAPBATT LAP 6 INCH SUPERIOR GRADE TIN ALLOY LAPBA5T LAP 8 INCH SUPERIOR GRADE SOLID CAST POLISHING  LAPDARKSIDE 8 INCH  SUPERIOR GRADE POLISHING LAP
8 inch BATT laps are superior grade laps manufactured in USA by Jon Rolfe of Gearloose. These laps are solid cast Tin alloy with both sides being usable. 6 inch BATT laps are superior grade laps manufactured in USA by Jon Rolfe of Gearloose. These laps are solid cast Tin alloy with both sides being usable. 8 inch BA5T laps are superior grade laps manufactured in USA by Jon Rolfe of Gearloose. These laps are designed for high speed commercial and competition faceting. A harder finer grained lap than BATT lap. 8 inch DARKSIDE laps are superior grade laps manufactured in USA by Jon Rolfe of Gearloose. Lightweight polishing laps and can be used with either Diamond or Oxide slurries. Very effective and popular for quartzes as well.

FSPOLB8

$NZ 198.00

FSPOLB6

$NZ 125.00

FSPOLB58

$NZ 275.00

FSPOLD8

$NZ 134.00

Add to cart

Add to cart

Add to cart

Add to cart

    
DARKSIDE 6 INCH SUPERIOR GRADE POLISHING LAPGREENWAY 6 INCH POLISH LAP CHROME OXIDE ADD WATERCREAMWAY 8 INCH POLISH LAP ZIRCONIUM OXIDE ADD WATERCREAMWAY 6 INCH POLISH LAP ZIRCONIUM OXIDE ADD WATER
6 inch DARKSIDE laps are superior grade laps manufactured in USA by Jon Rolfe of Gearloose. Lightweight polishing laps and can be used with either Diamond or Oxide slurries. Very effective and popular for quartzes as well. Greenway a 6 inch Chrome Oxide polymer-Just Add Water lap. Modified for exceptionally high oxide loading. Good with tourmaline, Beryls including emerald, quartzes, peridot, garnets, and feldspars. Not for Spinels, CZ or Corundum. 8 inch Creamway is a Zirconium Oxide/ceramic polymer Just Add Water lap. The polymer modified for exceptionally high oxide loading. Zirconium Oxide is more aggressive and faster than Cerium Oxide on polishing quartzes. 6 inch Creamway is a Zirconium Oxide/ceramic polymer Just Add Water lap. The polymer modified for exceptionally high oxide loading. Zirconium Oxide is more aggressive and faster than Cerium Oxide on polishing quartzes.

FSPOLD6

$NZ 117.00

FSPOLGW6

$NZ 125.00

FSPOLCM8

$NZ 135.00

FSPOLCM6

$NZ 115.00

Add to cart

Add to cart

Add to cart

Add to cart

    
6 INCH POLISHING LAP SKYWAY 4 BERYLS, TANZANITE, TOURM.8 INCH POLISHING LAP LIGHTSIDE 4 SOFT STONES6 INCH POLISHING LAP LIGHTSIDE 4 SOFT STONESSUPERIOR GRADE  TIN LAP FOR POLISHING.  8 INCH
6 inch Skyway polishing lap from the Battlap people. A water only lap and is aggressive and fast polishing for feldspars, peridot, beryls, quartzes, opals, garnets, tourmaline, tanzanite as well as Apatite. A ceramic/ polymer composite. 8 inch Lightside polishing lap from the Battlap people. This is a reduced friction gentle lap designed for use on soft materials like Diopside, Fluorite, Apatite, Rhodocrosite and other stones 5 and below in hardness. Use with Battstick. 6 inch Lightside polishing lap from the Battlap people. This is a reduced friction gentle lap designed for use on soft materials like Diopside, Fluorite, Apatite, Rhodocrosite and other stones 5 and below in hardness. Use with Battstick. Superior grade fine grained rolled 8 inch Tin lap is bonded to a Masterlap disc producing an excellent final polishing lap. This will not develop orange peel and does not require scoring. Used with polishing slurry.

FSPOLSW6

$NZ 165.00

FSPOLLS8

$NZ 144.00

FSPOLLS6

$NZ 124.00

FSPOL

$NZ 300.00

Add to cart

Add to cart

Add to cart

Add to cart

    
RAYTECH SUPERIOR GRADE TIN LAP 8 INCH8 INCH CAST CAST ZINC ALLOY PRE POLISHING LAP6 INCH CAST CAST ZINC ALLOY PRE POLISHING LAP6 INCH COPPER FACED LAP FOR CHARGE WITH DIA. POWDER
Raytech is a well priced 8 inch (20CM) Tin lap with a thickness of 7.5mm which can be used with oxide or Diamond polishes. It has a heavy layer of pure rolled Tin laminated to a Raytech Master Lap and turned true. Users have found this 8 inch special zinc alloy prepolishing lap is very fast and aggressive and that 8K diamond may be better than usual 3k prepolish. 3k will cut on this lap. 8k Diastick is now available for this lap Users have found this 6 inch special zinc alloy prepolishing lap is very fast and aggressive and that 8K diamond may be better than usual 3k prepolish. 3k will cut on this lap. 8k Diastick is now available for this lap 6 inch (15 cm) copper faced with 1/16 inch (1.59 mm) of rolled copper laminated to 1/4 inch (6.35 mm) thick aluminum Master Lap turned true. Traditional lap for charging with diamond powder. Mfd by Raytech Lapidary in the USA.

FSPOLR8

$NZ 185.00

FSPOLCZ8

$NZ 128.00

FSPOLCZ6

$NZ 99.00

FSPOLCOP6

$NZ 135.00

Add to cart

Add to cart

Add to cart

Add to cart

    
CRYSTALITE PHENOLIC  POLISHING LAP 6 INCHSPECTRA 6 INCH POLISHING DISCS-5 PIECES TO PACK SPECTRA 8 INCH POLISHING DISCS-5 PIECES TO PACK AL. OXIDE 6 INCH POLISHING DISCS-5 PIECES TO PACK
Phenolic lap is manufactured by Crystalite. This is 6 inch in diameter and has a 10 mm aluminum base with 3mm layer of Phenolic. Phenolics work well with all oxides for polishing. 1/2 inch arbour. Spectra Ultralap pack-five pieces of thin polymer film precharged with Cerium Oxide high grade(99.9%) polishing compound. 6 inch diameter and 1.5 micron (13,000) grit size. ½ inch arbour size. Use with Master lap under as base. Spectra Ultralap pack-five pieces of thin polymer film precharged with Cerium Oxide high grade(99.9%) polishing compound. 8 inch diameter and 1.5 micron (13,000) grit size. ½ inch arbour size. Use with Master lap under as base. Alumina oxide Ultralap pack-five pieces of thin polymer film precharged with Alumina Oxide polishing compound. 6 inch diameter and 0.3 micron grit size. ½ inch arbour size. Use with Master lap underneath as base.

FSPOLP6

$NZ 61.00

FSPOLS6

$NZ 45.00

FSPOLS

$NZ 46.00

FSPOLA6

$NZ 40.00

Add to cart

Add to cart

Add to cart

Add to cart

    
AL. OXIDE 8 INCH POLISHING DISCS-5 PIECES TO PACKCERIUM OXIDE 6 IN. POLISHING DISCS-5 PIECES TO PACKCERIUM OXIDE 8 IN. POLISHING DISCS-5 PIECES TO PACKTIN OXIDE 6 IN. POLISHING DISCS-5 PIECES TO PACK
Alumina oxide Ultralap pack-five pieces of thin polymer film precharged with Alumina Oxide polishing compound. 8 inch diameter and 0.3 micron grit size. ½ inch arbour size. Use with Master lap underneath as base. Cerium Oxide Ultralap pack-five pieces of thin polymer film precharged with Cerium Oxide polishing compound. 6 inch diameter and 1.5 micron (13,000) grit size. ½ inch arbour size. Use with Master lap underneath as base. Cerium Oxide Ultralap pack-five pieces of thin polymer film precharged with Cerium Oxide polishing compound. 8 inch diameter and 1.5 micron (13,000) grit size. ½ inch arbour size. Use with Master lap underneath as base. Tin Oxide Ultralap pack-five pieces of thin polymer film precharged with Tin Oxide polishing compound. 6 inch diameter and 1.2 micron grit size (14,000 Mesh). ½ inch arbour size. Use with Master lap underneath as base.

FSPOLA

$NZ 44.00

FSPOLC6

$NZ 40.00

FSPOLC

$NZ 44.00

FSPOLT6

$NZ 40.00

Add to cart

Add to cart

Add to cart

Add to cart

    
TIN OXIDE 8 IN. POLISHING DISCS-5 PIECES TO PACK
Tin Oxide Ultralap pack-five pieces of thin polymer film precharged with Tin Oxide polishing compound. 8 inch diameter and 1.2 micron grit size (14,000 Mesh). ½ inch arbour size. Use with Master lap underneath as base.

FSPOLT

$NZ 44.00

Add to cart

 
 
 

Master Lap:

Master Laps are designed to be used as a base/support for either thin 1mm “topper laps” used in preforming or the flexible thin polishing laps such as Ultralaps.

SUPERIOR GRADE MASTER LAP 6 INCH  BY RAYTECHSUPERIOR GRADE MASTER LAP 8 INCH  BY RAYTECHSUPERIOR GRADE MASTER LAP 8 INCH CRYSTALITE
Superior grade Aluminium lap used as base /support for topper laps (1 mm thick diamond plated discs) or Ultra-Laps. Manufactured by Raytech, a US supplier. 6 inches (15.2 CM) in diameter and 5.5 mm thick with ½ inch arbour. Superior grade Aluminium lap used as base /support for topper laps (1 mm thick diamond plated discs) or Ultra-Laps. Manufactured by Raytech, a US supplier. 7 ¾ inches (20 CM) in diameter and 5.5 mm thick with ½ inch arbour. Superior grade Aluminium lap used as base /support for topper laps (1 mm thick diamond plated discs) or Ultra-Laps. Mfd. by Crystalite, a US supplier. 8 inches (203mm) in diameter and 10 mm thick with ½ inch arbour.

FSMLR6

$NZ 73.00

FSMLR8

$NZ 90.00

FSML

$NZ 89.00

Add to cart

Add to cart

Add to cart

   
 
 

Miscellaneous:

Assorted faceting and cutting supplies.

SUPER GLUE 1-3 SECONDSUPER GLUE 10-15 SECONDSSUPER GLUE 1 -2 MINUTESUPER GLUE DEBONDER
This is a 1/2 OZ bottle of CA or cyanocrylate or super glue. Has a bonding time of 1 to 3 seconds and is thin viscosity. Made by Great Planes a US based company. Line up surfaces first and then wick in the CA. For close fitting surfaces. This is a 1/2 OZ bottle of CA or cyanocrylate or super glue. Has a bonding time of 10 to 15 seconds and is medium viscosity. Made by Great Planes a US based company. Line up surfaces first and then wick in the CA. For surfaces where may be small gaps. This is a 1/2 OZ bottle of CA or cyanocrylate or super glue. Has a bonding time of 1 to 2 minutes and is of a thicker viscosity. Made by Great Planes a US based company. Usefull for bonding surfaces where may be small gaps so you need to set and then keep stable until cured. This debonder gently dissolves all CA glues so surfaces can be pulled apart without damage. I OZ bottle. Read instructions before use. Made by Great Planes a division of Hobbico an American company.

FSCATHIN

$NZ 8.00

FSCAMEDIUM

$NZ 8.00

FSCATHICK

$NZ 8.00

FSDEBOND

$NZ 10.00

Add to cart

Add to cart

Add to cart

Add to cart

    
HOT STUFF SUPER GLUE ORIGINAL THINHOT STUFF SUPER GLUE SUPER  T MEDIUMHOT STUFF DEBONDERVIBRATORY TUMBLER V5 STARTER KIT RAYTECH
High quality 2 OZ. cyanocrylate or CA or super glue manufactured in the USA by Satelite City. Hot Stuff original is thin consistancy and is best for surfaces that dont have gaps that need filling. Make sure surfaces are aligned and run a drop along crack and it will wick in. Curing time 3 to 10 seconds approx. High quality 2 OZ. cyanocrylate or CA or super glue manufactured in the USA by Satelite City. Hot Stuff Super T is a medium consistancy and is best for surfaces that may have small gaps or you need slightly longer cure times. Curing time 10 to 25 seconds approx. High quality debonding liquid which is useful for unsticking misplaced CA or unsticking fingers etc. This is not acetone based so does not have that unpleasant smell that you get with acetone. Shelf life of 5 years when stored with tight cap. Tumbler starter kit has all polishing grits, machine and an exra bowl. Good quality inexpensive vibratory tumbler from Raytech in the USA. Set up for NZ use. Check out link to see it https://www.youtube.com/watch?v=KZhW4LIkDGo

FSHSTHIN

$NZ 21.00

FSHSMED

$NZ 21.00

FSHSSOLV

$NZ 15.00

FSTV5

$NZ 295.00

Add to cart

Add to cart

Add to cart

Add to cart

    
EXTRA BOWL FOR TV5 RAYTECH TUMBLERCERIUM OXIDE WATER SOLUBLE POLISHING COMPOUNDCHROME OXIDE WATER SOLUBLE POLISHING COMPOUNDZIRCONIUM OXIDE POLISH COMPOUND FOR QUARTZES
Extra bowl and lid for Raytech TV5 tumbler. Can be usefull if you want to keep a separate bowl for each grit. Battstick Cerium Oxide polish charging stick. A water soluble oxide polishing compound designed to reduce mess and waste associated with oxide slurries. Economical to use since a little goes a long way Battstick Chrome Oxide polish charging stick. A water soluble oxide polishing compound designed to reduce mess and waste associated with oxide slurries. Economical to use since a little goes a long way Battstick Zirconium Oxide polish charging stick. Highly specific for Quartz and is faster and with more agressive polish for Quartzes, outperforming Ce O. Also reported as good with beryls and peridot.

FSTV5BOWL

$NZ 65.00

FSMICE

$NZ 21.00

FSMICM

$NZ 21.00

FSMIZ

$NZ 21.00

Add to cart

Add to cart

Add to cart

Add to cart

    
DIAMOND 3000 WATER BASED POLISHING COMPOUNDDIAMOND 8000 WATER BASED POLISHING COMPOUNDDIAMOND 14000 WATER BASED POLISHING COMPOUNDBLACKSTIK 100,000 DIAMOND POLISHING COMPOUND
Diastick polishing compound stick charged with 3000 Diamond in self dispensing tube. Contains potent boundary layer lubricants is cool cutting economical to use since polishing requires little compound. Touch to spinning dry lap. Diastick polishing compound stick charged with 8000 Diamond in self dispensing tube. Contains potent boundary layer lubricants is cool cutting economical to use since polishing requires little compound. Diastick polishing compound stick charged with 14000 Diamond in self dispensing tube. Contains potent boundary layer lubricants and is cool cutting economical to use polishing requires little compound. Touch to spinning dry lap. Water based polycrystaline diamond polishing compound in 100,000 grit size. Will produce fast water wet appearing perfect polish on Topaz, CZ, Chrysoberyl and Corundums. Cool cutting and economical and requires little compound.

FSMID3

$NZ 44.00

FSMID8

$NZ 44.00

FSMID14

$NZ 44.00

FSMIBLACK

$NZ 44.00

Add to cart

Add to cart

Add to cart

Add to cart

    
DIAMOND 325 WATER SOLUBLE CUTTING COMPOUNDDIAMOND 600 WATER SOLUBLE CUTTING COMPOUNDDIAMOND 1200 WATER SOLUBLE CUTTING COMPOUNDRAYCOOL ¼  LITRE  WETTING AGENT/ CORROSION INHIBITOR
Diastick stock removal compound stick charged with 325 Diamond in a self dispensing tube. Contains potent boundary layer lubricants and is cool cutting and economical to use since requires little compound. Water soluble. Diastick stock removal compound stick charged with 600 Diamond in a self dispensing tube. Contains potent boundary layer lubricants and is cool cutting and economical to use since requires little compound. Water soluble Diastick stock removal compound stick charged with 1200 Diamond in a self dispensing tube. Contains potent boundary layer lubricants and is cool cutting and economical to use since requires little compound. Water soluble Raycool ¼ litre concentrate is manufactured by Raytech and is used as an additive to water coolant when grinding with Diamond laps and wheels. Contains wetting agents and corrosion inhibitors. Dilute 30:1

FSMID325

$NZ 44.00

FSMID600

$NZ 44.00

FSMID1200

$NZ 44.00

FSMIR

$NZ 22.00

Add to cart

Add to cart

Add to cart

Add to cart

    
SPRAY DIAMOND 6CTS 3,000 GRITDIAMOND COMPOUND 5 GRAMS 50,000 GRITDIAMOND COMPOUND 5 GRAMS 1200 GRITELECTRONIC DIGITAL CALIPERS 6 INCH OR 152 MM CAPACITY
6 cts of 3,000 grit first quality Crystalite diamond compound suspended in a pump spray bottle of deionized water. No fluorocarbons. 5 grams syringe of 50,000 grit Crystalite silicon based Diamond compound. These are temperature resistant and will not separate. Use with Crystalube to charge polishing pads. 5 grams syringe of 1200 grit Crystalite silicon based Diamond compound. These are temperature resistant and will not separate. Use with Crystalube to charge polishing pads. Electronic digital calipers with 6 inch or 152 mm capacity. Accurate to .001 of an inch. LCD dispay manufactured from stainless steel. Push button zero and inch/mm selection.

FSMISD3

$NZ 40.00

FSMIDC50

$NZ 30.00

FSMIDC1.2

$NZ 30.00

FSMIGUAGE

$NZ 58.00

Add to cart

Add to cart

Add to cart

Add to cart

    
ALCOHOL/SPIRITS LAMP FOR DOPPING
Alcohol lamp with wick for melting dopping wax. Can be used with meths or alcohol. Always take care with flammables.

FSMILAMP

$NZ 20.00

Add to cart

 
 
 

Home Page Crystals and Minerals Gem Cutting/Faceting Cabbing Rough Facet Rough Faceting Supplies
 Checkout